Mechanical and Metallurgical Engineering Seminar Topics

Seminar Topics and Materials PDF for Students in Nigeria


Message Us on WhatsApp (08143831497) to Get the Complete Material for Any of the Topics Listed Below or Send Us Your Approved Topic to Provide You With the Complete Material.

View All Departments


List of Mechanical and Metallurgical Engineering Seminar Topics for Students in Nigeria


  • Design And Fabrication Of A Medium Sized Household Biogas Plant

  • Construction Of A Standard Wheel Barrow

  • Ergonomic Assessment Of Korope Mini Buses

  • Operation And Maintenance Schedule Of A Steam Turbine Plant

  • Design And Fabrication Of An Electric Stove And Oven

  • Production Of Foam Using Plastic Support

  • A Project Report On Construction Of Industrial Sieve Compartment

  • The Effect Of Coriolis Force In The Vibration Of Pipeline Containing Flowing Liquid (Crude Oil)

  • Synthesis Of Biolubricant From Vegetable Oils

  • The Design And Fabrication Of A Pilot Production Plant For Paints (Emulsion And Texcoat)

  • Production And Characterization Of Biodiesel From Tiger Nut

  • Design And Fabrication Of Wood Lathe Machine

  • Gas Flaring And It’s Effect On The Environment

  • Production Of Plant Mirror Using Local Raw Material

  • Synthesis And Optical Characterization Of Nickel Doped Zinc Oxide Nanoparticles Using Chemical Bath Deposition Method

  • Design And Construction Of Journal Bearing Demonstration Rig

  • The Design And Fabrication Of Autonomous Polymer-Based

  • Construction Of A Distillation Column With Reflex Divider And Condenser

  • Construction Of A “Chemical Rack”

  • Temperature And Water Requirement For Leaching Of Caustic Alkali From ‘Ngu’

  • Design And Fabrication Of A Mango Juice Extractor

  • Design, Fabrication And Testing Of A Screw Press Briquetting Machine

  • Extraction Of Oil From Watermelon Seed

  • Production Of Liquid And Vapourised Air Freshener From Local Raw Materials

  • Estimation Of The Effect Of Nephrolepis Undulata Butanol Fraction On Glucose Absorption Across Intestinal Epithelium Of Alloxan Induced Diabetic Adult Wistar Rats

  • Air Injection Studies For Enhanced Oil Recovery

  • Development Of Environmentally Friendly Biodegradable Cutting Fluid From Soya Beans (Glycine Max)

  • Development Of Pilot-Scale Reactor For The Production Of Aluminium Hydroxide From Alum Derived From Kankara Kaolin For Zeolite Y Synthesis

  • Refining Of Soya Bean Oil

  • Design And Fabrication Of A Cost Effective Plastic Extruding Machine

  • Construction Of A Mobile Refrigerator

  • An Emission Inventory Of Pollutant

  • Process And Quality Factors In Laundary And Toilet Soap Production

  • Experimental Investigation Of Macronutrient Contents Of Cassava Leaves Composted Agricultural Soil

  • Project Repair And Fabrication Of A Refrigerator System

  • Maintenance Of 6.5 Horse Power Generators (H.P)

  • Construction Of A Chemical Rack, Study Apparatus

  • Performance Evaluation Of Different Materials As Chills In Sand Casting Of Aluminium Alloy

  • Adaptation Of Locally Cast Material For Peugeot 406 Piston

  • Extraction Of Silica From Rice Husk Ash

  • Adsorption Of Palm Oil With Synthetic Adsorbent (Coal)

  • An Emission Inventory Of Pollutants

  • Repair And Fabrication Of A Refrigerator System

  • Alternative Raw Material Sources For Cement Production

  • The Effect Of Weight Percentage Of Silicon Carbide On Mechanical Behavior Of Aluminum Metal Matrix Composite

  • Temperature And Water Requirement For Leaching Of Caustic Alkalt From ‘Ngu”

  • Construction Of Cellophane Sealing Machine

  • The Design And Construction Of A Modern Nail Gasket Machine

  • Construction Of Office Table And Chairs

  • Construction Of A Bench Shaping Machine

  • Assay Of Various Brands Of Ferrous Sulphate Tablets Using Aqueous Titrimetric Method

  • The Design And Construction Of A Spin Dryer

  • Extraction And Characterization Of Oil From Cashew Nut

  • Refurbishing Of A Fixed And Fluidized Bed

  • Fabrication Of Candle Mould With Twenty Four (24) Holes

  • The Construction Of Sieve Equipment

  • Production Of Bio-Diesel Using Palm Kernel

  • Fabrication Of Bench Shaping Machine

  • The Application Of Size Reduction

  • Construction Of Aluminum Wall Rack

  • Assessment Of Carbon Monoxide (CO) Level

  • The Design And Fabrication Of A Commercial Grinding Mill

  • Construction Of A Screw Conveyor With A Single Phase Electric Motor

  • Report On Fabrication Of Flow Nozzle

  • The Effect Of Storage On Unrefined Vegetable Oil

  • The Design And Construction Of Baking Oven

  • Production And Fermentation Of Alcohol From Palm Wine

  • Fabrication Of Domestic Deep Freezer

  • Refurbishing Of Mechanical Engineering Drawing Studio

  • Solid Waste Separation And Utilization

  • Design, Simulation, Construction And Performance Evaluation Of A Solar Oven

  • Production Of Black And Brown Polish

  • Water Pollution

  • Repair Of Stop Clocks

  • Production Of Wood Adhesive

  • Interface Monitoring And Analysis Of Pipeline And Products Marketing Company Limited

  • Production Of Crude Oil- Drilling Process

  • Construction Of Motorized Mixer

  • The Effect Of Environment On Corrosion

  • The Design And Fabrication Of Modern Lockable Bookshelf

  • Construction Of A Vertical Fire Tube Boiler

  • The Use Of Locally Obtained Rubber Latex As Binder In Paint Formulation

  • Synthesis Of Activated Carbon From Enugu Coal

  • Measurement And Evaluation Of The Performance Properties Of Selected Locally Produced Lubricants (Engine Oil)

  • Construction Of A Simple Size Reduction Machine

  • Repair And Refurbishment Of A Centrifugal Pump

  • Production Of Slow Burning Candle

  • Dehydration Of Ethanol Water Solution Using Activated Starch

  • Construction Of A Pilot Motorised Mixer

  • The Fabrication Of A Foldable Camp Bed

  • Enhancement Of Cellulosic Ethanol Production Through Aspergillus Niger Modification

  • Construction Of An Open Steam Distillation Column

  • Construction Of Portable Wheel – Barrow

  • The Design And Fabrication Of A Burr Mill

  • Effect Of Particle Size On Oil Yield Using Scent Bean Seed (‘Ozaki’)

  • The Design And Fabrication Of A Metal Bookshelf

  • Construction Of Wheelbarrow

  • Report On The Fabrication Of Sieve System

  • Assessment Of Carbon Monoxide (CO) Level In Enugu Metropolis Monitoring Industrial And Residential Area

  • Extraction Of Oil From Coconut And Its Characterization

  • Repair Of Deep Freezer

  • Construction Of Reading Table And A Chair

  • The Rate Of Bleaching Of Palm Oil White Coal

  • Fabricate And A Performance Evaluation Of A Tractor Mounted Single Row Cassava Planter In A System Of Operation

  • Construction Of A Fluidzed Bed Reactor

  • Construction Of Flow Nozzle

  • Real Time School Bus Tracking System Using (RFID)

  • Production Of Briquette From Waste Materials Using Locally Fabricated Equipment

  • The Construction Of An Electrical Stove With Three-Oven Apartment

  • Development Of Aerosol Insecticide Using Local Raw Materials

  • Construction Of Industrial Sieve Compartment

  • Formulation Of Perfume From Essential Oil Extracted From Lemongrass

  • Design And Fabrication Of An Office File Cabinet

  • Repair Of A Damaged Refrigerator

  • Factors Influencing Accelerated Corrosion Of Cargo Oil Tanks

  • Construction Of Air Conditioning Unit

  • Repair And Rehabilitation Of A Faulty Deep Freezer

  • Web Based Legal Practitioner Application System

  • Design And Construction Of Dual–Powered Heat Treatment Furnace

  • Construction Of A Portable Electric Operated With Radio Control (Wireless Remote) Motor Vehicle For Long Valve Bus

  • Effects Of Vernonia Amygdalyna Ethyl Acetate Fraction On Intestinal Glucose Absorption In Alloxan Induced Diabetic Adult Wistar Rats

  • The Construction Of Sand Filter For Portable Water Filtration With Stainless Steel Material

  • Use Of Local Raw Materials And Animal Bone To Simulate The Production Of Human Teeth For Dental Restorative Practice In Nigeria

  • Biomonitoring Of The Toxicity Of Some Heavy Metals In Occupationally Exposed Workers In Nigeria

  • Development And Characterization Of Self-Healing Car Paint Using Chitosan

  • Analysis Of Bush Pear And It’s Oil

  • Effect Of Liquid Flow Rate And Gas Flow Rate On A Packed Absorption Tower And Repair Of Equipment

  • Production Of Bioethanol From Elephant Grass (Pennisetum Purpureum) Stem

  • Refining Of Palm Kernel Oil

  • Fabrication Of Twin Panel Metal Door

  • Industrial Wastewater Treatment Technology In Petroleum And Chemical Industrial

  • Design And Fabrication Of A Double Pipe Heat Exchanger

  • Investigation Of The Effect Of Moulding Sand (Natural & Synthetic) On Casting Of Flange Using Aluminium

  • The Design And Construction Of A Woodlathe Machine

  • A Decision Model For The Design And Operation Of Inventory Programmes In A Manufacturing Industry

  • The Anti-Inflammatory Activity Of Crateva Adnsonii Dichloromethane Fraction

  • Fabrication For A Set Of Sieves And Saker

  • The Kinetic Study On Hydrolysis Of Cellulose (Saw-Dust)

  • Design And Fabrication Of Mobile Deep Freezer

  • The Refurbishment Of Temperature Control Apparatus

  • Effect Of Interface On The Quality Of Petroleum Product In Multi Purpose Pipeline System

  • Modification Of Proto-Type Air Conditioning Unit

  • Production Of Plastic Materials

  • Production Of Emulsion Paint Using Dyed Cassava Starch As Pigment

  • Design And Installation Of Cathodic Protection System Using Zinc Anode

  • Extraction Of Oil From Local Seed (Groundnut Seed) and Characterization

  • The Inhibition Efficiency Of Lasienthera Africanum As A Natural Corrosion Inhibitor

  • Construction Of A Metal Rack

  • Construction Of An Open Steam Distillation

  • Assessment Of Oil Extracts From Tiger Nut(Cyperus Esculentus), Water Melon (Citrullus Vulgaris) Andneem Seeds (Azadirachta Indica) As Cutting Fluids In Drilling Operation Of Mild Steel

  • Design And Construction Of A Metallic Book Shelf

  • Transient Heat Conduction In A Solidifying Alloy

  • The Principle Of Fluid Mechanics And The Numerical Procedure In CFD

  • The Construction And Fabricated Of A Mobile Deep Freezer

  • Production Of Ethanol Through The Fermentation Of Reducing Sugars Resulting From The Hydrolysis Of Pretreated Sawdust (Hardwood)

  • Refining Of Vegetable Oil With Enugu Coal

  • Fabrication On Domestic Refrigerator

  • Construction Of Turbine Mixer

  • Repair Of Air Conditioner In Mechanical Engineering Department

  • Glycerine Recovery From Spent Soap Lye

  • Assessment Of Oil Spillage And It’s Control In The Oil And Gas Industry In Nigeria

  • Modification Of An Existing Metal Sheet-Bending Machine

  • Design Of A Plant To Produce 60,000 Tonnes Of 2-Ethyl Hexanol From Propelene And Synthesis Gas

  • Design And Fabrication Of An Egg Incubator

  • Constitution And Fabrication Of Bench Shearing Machine

  • Design And Construction Of Mitchell Tilting Pad Apparatus

  • Design And Construction Of Corn / Maize Threshing Machine

  • Design And Construction Of A Refrigerating Unit

  • Extraction Of Wax From Cocoa Pod

  • Design And Construction Of Punch And Die For Production Of Cups

  • Construction Of Venturimeter

  • The Detail Fabrication Of A Candle Moulding Machine

  • Ethanol Production From Cocoyam Peels

  • Design And Fabrication Of Maize Corn-On-Cob Tray Dryer

  • The Potentials For A Co-Operative Thrift Credit Society In A Higher Education Institution

  • Construction Of Simple Metallic Mould

  • The Repair And Maintenance Of A Faulty Deep Freezer

  • Fabrication Of Bench Shearing Machine

  • Production Of High Quality Liquid Air Refresher

  • Design And Construction Of A Bedside Refrigerator

  • Performance Improvement Of Diesel Engines By Stress Reduction Using A Four Cylinder Diesel Engine As Model

  • Design And Fabrication Of A Creep Testing Equipment

  • Construction Of Metal Shelf

  • Analysis Of Enugu Coal

  • Design Of Plant For The Production Of 72000 Tonnes / Year Of 2- Ethylhexanol From Propylene And Synthesis Gas

  • Construction Of Soap Moulds, Table And Cutters

  • Manufacture Of Ceiling Board Using Local Materials

  • Formulation And Comparison Of Industrial Bar Soap And Detergent

  • Construction Of A Standard Drawing Desk

  • Construction Of A Potable Electric Operated With Radio Control Wireless Remote Motor Vehicle For Long Danza Bus

  • Design And Fabrication Of Motorized Operated Groundnut Decorticating Machine

  • Head Loses In Horizontal And Vertical Orificemeter, A Comparative Evaluation And Analyses With Application Of Statistical Method Of Data Reliability

  • Design And Construction Of A Woodlathe

  • The Fabrication Of A Polythene Bag Sealing And Cutting Machine

  • Construction Of An Industrial Barrow

  • The Impact Of Jet Apparatus

  • Preparation Of Soap Using Different Types Of Oils And Exploring It’s Properties

  • Production Of Cassava Flour Using Traditional Processing Method And Modern Processing Method

  • Construction Of Two Face Gas Burner

  • Crises Management In Industrial Environment

  • The Construction And Fabrication Of Metal Booksheet

  • Nanoporous Materials: From Catalysis And Hydrogen Storage To Wastewater Treatment

  • The Repair Of A Damaged Air Conditioner

  • Design And Construction Of A Two-Wheel Motorized Scooter

  • Construction Of Hydro Cyclone

  • Production Of High Quality Foam

  • Construction Of Kerosene Cooking Stove

  • Rectification And Repair Of A Faulty Air Conditioner In The Mechanical Engineering Department At The Institute Of Management And Technology (I.M.T) Enugu

  • Repair And Rehabilitation Of A Faulty Air Conditioner

  • The Design And Fabrication Of A Iron Shelling Machine

  • Design And Fabrication Of Groundnut Shelling Machine

  • Design And Fabrication Of A Palm Fruit Digester

  • The Design And Construction Of Hot Printing Machine

  • Effect Of Welding Consumables On The Microstructure And Mechanical Properties Of A Welded SA 530 GR 70 Steel

  • Modern Washing Machine, Principles Of Operation And Maintenance

  • Fabrication Of Briquette Stove

  • Effect Of Different Solvent Types On The Yield Of Oil From Avocado Pear Seed

  • Mechanical Properties Of An Aluminium Or Silicon Carbide Composite Connecting Rod Containing Varying Volume Fractions Of SIC

  • Cardio Protective Activities Of N-Hexane Extract Of Desmodium Velutinum Stem On Albino Wistar Rat

  • Construction Of A Steel Cupboard

  • Fabrication Of Aluminium Window

  • Operation And Maintenance Of Steam Boiler

  • Effect Of Gasification Operating Parameters On Quality Of Syngas Produced Using Sawdust Feedstock

  • Fabrication Of Yam Pounding Machine

  • Design And Fabrication Of A Hydropneumatic Pressure Booster Tank System Of 1800 Litres Capacity

  • The Effects Of The Action Of Detergent And Soap On Soil / Dirty Substance During Washing

  • Construction Of Simple Distillation Unit

  • Morphological Study Of Sol-Gel Derived TiO2 Modified With Silver Nanoparticles For Photovoltaic Applications

  • Development Of Baobab / Sisal Reinforced Low Density Polyethylene Hybrid Composite

  • Design Of Molten Salt Cooler In Process Plan For Production Of 2-7 X 104 Tonnes/Yr Of Phthalic Anhydride By Diret

  • Characterization Of Some Branded Motor Oil

  • The Fabrication Of A Single Face Pressurized Kerosene Cooker

  • Construction Of Steel Cupboard

  • Fabrication Of A Standard Wheel Barrow

  • Phytochemical Analysis Of Moringa Oleifera And Azadrichta Indica Leaves

  • Utilization Studies Of Enugu Coal

  • Construction Of Kerosine Cooking Stove

  • Design And Fabrication Of A Dust Extractor

  • Fabrication Of Electrical Pop Corn Machine

  • Design And Evaluation Of Pediatric Gait Rehabilitation Robots

  • Design And Fabrication Of Mechanical Lawn Mower

  • Optimization Of Activated Carbon Preparation From Corncob Wastewater Treatment

  • Production Of Liquid And Vaporized Perfumes Using Local Materials

  • A Comparative Study Of Chemical And Microwave Synthesized Activated Carbon From Corn Cob

  • Construction Of Packed Distillation Column

  • Repair And Rehabilitation Of A Faulty Air Condition

  • Design And Fabrication Of A Printing Machine

  • Automobile Motor Vehicle Construction

  • Design And Fabrication Of Domestic Deep Freezer

  • Production Of Chemical Insecticides Using Neem Oil And The Processes Involved

  • Production Of Cassava Of Starch From Cassava

  • Effect Of Spent Oil (Engine Oil) On The Physiochemical Properties Of Soil

  • Design And Fabrication Of A Laboratory Scale Activated Carbon Filter For Water Treatment

  • Presentation On The Construction Of “S” Liter Electric Kettle

  • Comparison Of The Histological Structure Of Tongue Of A Carnivore, Cat And Some Other Vertebrates In Relation To Their Feeding Habits

  • Construction Of Nylon Sealing And Cutting Machine

  • Production Of Emulsion Paint With The Available Material

  • Production Of Alkali Using Local Raw Material

  • The Effect Of Temperature On Hydrolysis Of Cellulose

  • Utilization Studies

  • Design And Manufacture A Fuel Less Generator

  • Construction Of 500 Galion (2250 Litres) Water Reservoir

  • Utilization Of Plantain Stem Fibre For Making Wrapping Materials

  • Design And Construction Of 2.5kg Weight Bench Vice

  • Repair Of Deep Freezer In Mechanical Engineering Department

  • The Design And Construction Of Mini Radio Broadcast Transmitter And Audio Console Using Frequency Modulation (FM) With Power Rating Of 1 Watt

  • Design And Fabrication Of Children Swing

  • Construction Of Industrial Mixer

  • Fabrication Of A Pressurized Kerosene Oven

  • Construction Of Aluminium Wall Rack

  • Fabrication Of Metal Panel Door

  • Design And Construction Of A Submarine Hull

  • Design Of Melon De-Husking And Separation Machine

  • Maintenance Of Pilot Plant Spray Dryer

  • Panel Painting Using Bamboo

  • The Effect Of Particle Size On The Extraction Of Oil From Groundnut

  • Effect Of Eggshell As A Filler On The Mechanical Properties Of Flexible Polyurethane Foam

  • The Design Of A CNC Mill For Product Prototyping

  • Production Of Domestic Powder

  • The Coils Production In Manufacturing Industry

  • Bleaching Of Palm Oil Using Activated Charcoal

  • Construction Of Metal Sharpening And Dulling Device

  • Construction Of Vertical Fire Tube Boiler

  • A Project On Construction Of Propeller Agitator

  • The Use Of Local Pigments And Extenders For Formulation & Production Of Emulsion Paint

  • Repair And Recommissioning Of Process Heat Transfer Apparatus

  • Design And Fabrication Of Electrical Motorized Bicycle Wheelchair

  • Desulphursation Kerosene

  • Construction Of A Juice Extractor Machine

  • Evaluation Of Hot- Gas And Heated Tool Weldments Of Polypropylene / Bone Particulate Composites

  • Design Of A Plant To Produce 60,000 Metric Tonnes Of Vinegar From Palm Wine Per Year

  • The Production Of Yam Flour

  • Economic Viability Of A Small Hydropower Plant

  • A Comparative Study Of Chemical And Microwave Synthesized Activated Carborn From Corn Cob

  • Design And Fabrication Of A Printing I Block Machine

  • Design And Fabrication Of Corn Shelling Machine

  • Determination Of Heavy Metal In Effluents From Some Selected Pharmaceutical Companies

  • Production Of Activated Carbon From Dom Palm And Its Adsorption Performance On Heavy Metals

  • Preservation Of Palm Wine Using Ultraviolet Radiation

  • Formulation And Production Of Levera Soap

  • The Refurbishment Of Temperate Control Apparatus

  • Construction Of Industrial Wheel Barrow

  • Production Of A High Quality Bar Soap And Compare With Detergent

  • Design And Analysis Of A Small-Scale Cost-Effective CNC Milling Machine

  • Investigation Of Mechanical Properties Of Zeolite-Y And ZSM-5 Catalysts Synthesized From Locally Available Clays

  • Design And Fabrication Of Basic Static And Dynamic Balancing Machine

  • Construction Of A Blender

  • The Construction And Fabrication Of A Candle Moulding Machine

  • Construction Of Steel – Shelf

  • Construction Of Soap Cutting Device

  • Determination Of The Concentration Levels Of Total Petroleum Hydrocarbons (TPH) In Soils Found In Automobile Shop

  • Repair Of A Faulty Refrigerator

  • Selection Of Lubricating Oils For Varied Engine Performance

  • Safety Concern In Liquefied Petroleum Gab Environment

  • Maintenance Of Workshop Equipment

  • Desulphurisation Kerosene

  • The Construction Of A Standard Banking Oven (Mini-Oven) With Dual Power Source (Electric / Gas)

  • Design And Fabrication Of A Mobile Refrigerator

  • Formulation And Production Of Alcohol From Palm Wine

  • Construction Of A Model Shell And Tube Heat Exchanger

  • Water Purification Unit

  • Evaluation Of Maintenance Management System In Total Exploration & Reduction Nigeria Limited, Obagi Base, Oml58, Rivers State, Nigeria

  • Production And Characterization Of Soft Soap From Local Potash (NGU) Or Caustic Potash Laboratory Or Commercial Grade

  • Effect Of Faulty Design And Construction On Building Maintenance (Case Study Of AFDIN And Mother CAT Construction Companies In Kaduna State)

  • Production Of Aluminium Pots

  • Extraction And Characterization Of Oil From Date Seed

  • Construction Of Soap Cutting Table, Soap Mould And Soap Cutters

  • Fabrication And Construction Of Window Burglar Proof

  • The Effect Of Temperature On Hydrolysis Of Cellulose (Saw-Dust)

  • The Production Of Yam Flour From Yam Chips

  • Extraction Of Formulation Of Perfume From Plant

  • Comparative Analysis Of Coal And Coconut Activated Carbon

  • The Rate Of Adsorption Of Palm Oil With Bituminous Coal

  • Design And Construction Of Grain Grinding Machine

  • Polythene Automatics Sealing Machine

  • Repair Of An Air Conditioner

  • Development And Use Of Nonwood Plant Fibers In Pulp And Papermaking

  • Design And Fabrication Of A Simple Low Cost Washing Machine Suitable For Washing Polyethylene Materials

  • Construction Of Sheel And Tube Heat Exchanger

  • Construction Of Heat Exchanger Fabrication Of A Tube And Shell Heat Exchanger System

  • Modification Of Surface, Physical And Chemical Properties Of Activated Carbons For Water Purification

  • Fabrication Of A Pepper Grinding Machine

  • Construction Of 2,000 Litres Capacity Water Re-Servoir

  • Design And Fabrication Of A Deep Freezer

  • Design And Operation Of A Shell And Tube Heat Exchanger

  • Performance Evaluation Of Downdraft Gasifier For Syngas Production Using Rice Husk